SABIO CF-03 series is designed for misting/fogging/cooling pump. Unlike other misting pumps on the market. It is allowed to working 24 hours and so easy and quick to replace the main consuming parts. Refer to our maintenance video. It enables end users to DIY/repair their own misting pump or system if the supplier cannot provide instant assistance. Also, this also saves time and money for suppliers when they have to repair the pump for customer inevitably from long distance.
CF-03 Misting Pump
1. Pump Body- Made of alluminum alloy by gravity die casting, pressure range 0-120 bar.
- Compact and small (300*260*180mm) Allow it easy to be assembled into the required system/module.
2. Horizontally opposed cylinder design
- The unique flat-four cylinders design with a patented interlocking plate driven by an eccentric shaft, can move the plungers inward and outward synchronously.
- A perfect dynamic balance can be achieved in a high mechanical efficiency led to a low energy consumption, low vibration and low pulsation.
- Energy spends less while other conventional plunger pumps on the market need additional 10%-25% KW.
- The pump efficiency can reach almost 100% in the low pressure (0-20 bar), and 93% at 70 bar.
3. Innovation for sustainability: Self-lubricating system.
4. Maintenance & Repair
- This patented system allows the oil to lubricate the whole pump, traveling from the oil tank to the eccentric shaft and then return to the tank as a sustainable circle.
- The operation temp can be controlled around 25°C or 77°F as the bering is lubricated all the time without generating heat .
- 4000 hrs continuous operation is feasible as the crucial components are welly protected by the sustainable system.
4. Maintenance & Repair
- The crucial consuming parts are integrated into a bush kit, consisting of water seals, oil seals and O-rings. Easy for customers to replace and repair by themselves.
- High durability: 10 years+ lifespan for non-consuming parts and the bush kit can resist at least 3,000 hrs.
- Maintenance cost. 13-15% per 3000 hrs. Only needs half year to refill or replace the oil.
- Two years warranty.
*Plunger bush kit: seals and O-rings integration
IDA Sliver Reward
High Pressure Pump Spec
| Model | Max Pressure | Flow rate | Absorbed power | Net Weight | |||||
|---|---|---|---|---|---|---|---|---|---|
| bar | psi | LPM | GPM | Hp | RPM | Volt/Hz | Phase Pole | ||
| CF-15 | 120 | 1740 | 15/12 | 3.96 /3.17 | 5 | 1460/1720 | 220V/380V 50Hz/60Hz |
Three 4 |
6.8 |
| CF-25 | 120 | 1740 | 25 /20 | 6.6 /5.28 | 7.5 | 1460/1720 | 220V/380V 50Hz/60Hz |
Three 4 |
6.8 |
| CF-40 | 120 | 1740 | 40/32 | 10.56/8.45 | 13 | 1460/1720 | 220V/380V 50Hz/60Hz |
Three 4 |
10.7 |
Misting Pump Technical Date
| Model | Max Pressure | Flow rate | Absorbed power | Net Weight | |||||
|---|---|---|---|---|---|---|---|---|---|
| bar | psi | LPM | GPM | Hp | RPM | Volt/Hz | Phase Pole | ||
| CF-03F | 70 | 1000 | 2.5/2 | 0.66/0.53 | 1/2 | 1460/1720 | 110V/220V 50Hz/60Hz |
Single 4 |
2.7 |
| CF-03S | 70 | 1000 | 1.6/1.3 | 0.42/0.34 | 1/2 | 900/750 | 110V/220V 50Hz/60Hz |
Single 8 |
2.7 |
Comparison table
| Pump type | Pump Efficiency* | Initial Costs* | Energy costs* | Maintenance & repair Costs* | 24/7 continuous operation | Resistance to wear chips* |
|---|---|---|---|---|---|---|
| Sabio | 90-100% | Medium | Low | Low | YES | High |
| Triplex plunger | 85%-100% | Medium High | Low | Medium | YES/NO | High |
| Muti-stage Centrifugal | 40%-60% | High | High | High | YES | Low |
| Gear | 70%-90% | Low | High | Low | NO | Low |
| Diaphragm | 95% | Medium | Medium | High | NO | Medium |
- Tested in 70 bar& 2.0mm nozzle
- Over$1500~2000 USD=High; $1000~1500 USD= Medium; Lower$1000 USD=Low
- Maintenance cost per 3000 hrs: over 20% of the pump price=High; 15%~20%= Medium; 10%~15%=Low
- 25% energy saving compared with conventional plunger pumps